Alarm Parts
+Doorsensor
+Wireless PIR Detector
+Wire PIR Detector
+Smoke Alarm
+Gas Detector
+PIR Sensor Switch
Alarm Parts
Your Location：Home > Products > Alarm Parts
wireless door sensor
Introduction：

This product is a multifunctional wireless door sensor. Integrate functions of emergency button and door sensor , with a design of low power consumption chip and of low voltage fault monitoring report, anti-tamper and anti-destruction. Compatible with 2262/1527 coding format, oscillation resistance optional. The outer enhanced antenna with a long-distance emission . Typically apply to all kinds of anti-theft doors & windows of households and commerces.

PIR sensor
Introduction：
CBS-PIR01 is wireless passive infrared detector with high stability.It has adopted advanced technology in signal processing and provided superhigh detection ability and antierror alarm. The detector will detect movement of human automatically when intruder pass throughthe detected area, and it will send out alarm signal to alarm host if there is movement. The product is suitable for the safety of residential house, villas, factories, markets warehouses, office building,etc.
Wireless PIR Sensor
Introduction：
CBS-PIR02 is wireless passive infrared detector with high stability.It has adopted advanced technology in signal processing and provided superhigh detection ability and antierror alarm. The detector will detect movement of human automatically when intruder pass throughthe detected area, and it will send out alarm signal to alarm host if there is movement. The product is suitable for the safety of residential house, villas, factories, markets warehouses, office building,etc.
Wired PIR Sensor
Introduction：

 Detector Wired PIR Sensor

CBS-PIR003 

Operating voltage:DC 9V-16V
Current comsuption:18mA(DC12V)
Detecting distance: 12m
Detecting angle: 110
Self-testing time: 60S or so
Working temperature: -10~+50
Alarm indicator: red LED
Alarm output:N.C. or N.O., DC28V,100mA
Temper output: N.C., DC28V, 100mA
Range of coverage: 11 distance, 8 middle, 5 vicinities
Sensor: dual element infrared sensor
Operating temperature: -10to +50
Environment humidity:less than 95% RH (no congelation)
Anti RF interference: 10MHz-1GHz 20V/m
Installation mode: wall mounted or hanged in corner
Installation height: 1.7 to 2.5m (2.2m is Proposed
Outline Size: 52.5L*38.5W*89H mm


Smoke detector
Introduction：

CBS-S001 smoke detector

STAND-ALONE SMOKE DETECTOR

1.Easy to install with mounting hardware included

2. 9 Volt battery included

3.Suitable for any room Test button for easy recommended monthly testing

4. Low battery signal

5. To protect you,a safety clip will not allow mounting of smoke alarm without 9 Volt battery installed

6. Ionization chamber for early detection from all directions

7.Loud 85db alarm signal




<< < 1 2 > >>

Shenzhen CBS Eelectronic CO.,LTD

Address: 4th floor, A2 Building, JunXing Industrial Park A, Fu yuan Road two, FuYong, Bao'an, Shenzhen,518103, China.