instructions for curtain's controller

1. Limit switch 1 (Low power with a valid)

2. Negative electrode of Limit switch

3. Limit switch 2 (Low power with a valid)

4.Learning button

5. 220VAC zero line input

6.220VAC live line input

7. Motor turn or turn over（220VAC） output

8.zero line of motor

9. Motor turn or turn over（220VAC） output

Method of clear code and learn code

Clear code:

Press and hold the learn button and then connected to power, LED  light up after a few seconds goes out and then release the learn button to clear all codes. 

Learn code:

After connected to power hold the learn button, press any button of the remote control ,LED of the receiver flashing , it means learn code successfully ( This controller which is one to one, it means if you just lean one button, the only one can be used. 4 button can be used when the 4 button learned code. )